As an Amazon Associate, DIY Handy Gear earns from qualifying purchases.

A circular saw can cut steel studs, angle iron, conduit, and aluminum stock just fine — it just needs a blade built for it. The factory wood blade on your saw spins too fast and isn't ground for metal, so it dulls instantly or chips the first time it touches steel.

Carbide-tipped metal-cutting blades fix that by swapping in a tooth grind and a lower effective chip load suited to metal, letting you skip a separate tool like an angle grinder or metal-cutting chop saw for most home and remodeling jobs.

Ferrous (steel, studs, rebar) and non-ferrous (aluminum, copper, brass) metals need different tooth geometry, so we've split out picks for each below rather than treating 'metal-cutting blade' as one category.

Need the saw itself, not just the blade? See our picks for the best circular saws.

How we picked: We prioritized blades with carbide tooth geometry genuinely designed for metal rather than wood blades marketed as multi-purpose, and we called out which picks are rated for ferrous metal, non-ferrous metal, or both. Selections draw on manufacturer specs and published tradesperson and DIY feedback rather than our own cut testing.

At a glance

#PickWhy it stands outPrice
Diablo D0742F Steel Demon 7-1/4 in. 42-Tooth Carbide-Tipped Ferrous Metal Cutting BladeTop Pickoverall for steel studs, angle iron, and rebar - Carbide teeth ground specifically for ferrous metal hold up far longer than a wood blade pressed into service on steelCheck Amazon
Diablo D1072N Non-Ferrous Metal Demon 10 in. 72-Tooth Carbide-Tipped BladeRunner-upaluminum, copper, and brass - Tooth grind and higher tooth count are matched to softer non-ferrous metals instead of steelCheck Amazon
Evolution 7-1/4 in. 20-Tooth TCT Steel Cutting BladeBest Valuecleaner, lower-spark cuts in mild steel - Tungsten carbide teeth are built specifically around cold-cutting mild steel on a standard circular sawCheck Amazon
DeWalt DW9152 7-1/4 in. 66-Tooth Steel-Cutting Saw BladeAlso greatbudget-friendly pick for conduit and thin steel - Higher 66-tooth count is well suited to thin stock like EMT conduit and light-gauge steel studsCheck Amazon

The picks in detail

Diablo D0742F Steel Demon 7-1/4 in. 42-Tooth Carbide-Tipped Ferrous Metal Cutting Blade

Top Pick

9.6/10Editor’s score

Best overall for steel studs, angle iron, and rebar

  • Carbide teeth ground specifically for ferrous metal hold up far longer than a wood blade pressed into service on steel
  • Handles steel studs, angle iron, and rebar without the sparks and noise of an abrasive cutoff wheel
  • Fits any standard 7-1/4 inch circular saw, cordless or corded

Watch out Rated for ferrous metal only — swap to a non-ferrous blade before cutting aluminum or copper.

Check price on Amazon

Diablo D1072N Non-Ferrous Metal Demon 10 in. 72-Tooth Carbide-Tipped Blade

Runner-up

9.3/10Editor’s score

Best for aluminum, copper, and brass

  • Tooth grind and higher tooth count are matched to softer non-ferrous metals instead of steel
  • Leaves a cleaner edge on aluminum extrusions and sheet than a ferrous-rated blade would
  • Same drop-in swap as any other blade change, no extra tool needed

Watch out Larger 10-inch size is built for table and miter saws, so confirm your circular saw accepts this diameter before buying.

Check price on Amazon

Evolution 7-1/4 in. 20-Tooth TCT Steel Cutting Blade

Best Value

9.0/10Editor’s score

Best for cleaner, lower-spark cuts in mild steel

  • Tungsten carbide teeth are built specifically around cold-cutting mild steel on a standard circular saw
  • Produces noticeably less sparking and heat than an abrasive metal-cutting wheel
  • Fits the same 7-1/4 inch saws most DIYers already own

Watch out Lower tooth count trades a bit of edge smoothness for faster cutting — fine for studs and framing, less ideal for a visible finished edge.

Check price on Amazon

DeWalt DW9152 7-1/4 in. 66-Tooth Steel-Cutting Saw Blade

Also great

8.7/10Editor’s score

Best budget-friendly pick for conduit and thin steel

  • Higher 66-tooth count is well suited to thin stock like EMT conduit and light-gauge steel studs
  • Priced low enough to keep as a dedicated second blade for occasional metal cuts
  • Compatible with any 7-1/4 inch circular saw, not just DeWalt saws

Watch out Not the pick for thick structural steel or repeated heavy-duty cutting — it's sized for lighter-gauge metal.

Check price on Amazon

Frequently Asked Questions

Can I really cut metal with a regular circular saw?
Yes, as long as you swap in a carbide-tipped blade rated for metal. The saw itself doesn't need to change — it's the tooth grind and tooth count on the blade that make the cut possible and keep the blade from dulling or chipping on contact with metal.
What's the difference between a ferrous and non-ferrous metal blade?
Ferrous blades, like the Diablo Steel Demon or DeWalt DW9152, are ground for steel, studs, and rebar. Non-ferrous blades, like the Diablo Metal Demon, use a different tooth geometry suited to softer metals like aluminum, copper, and brass. Using the wrong one shortens the blade's life and gives a rougher cut.
Do I still need an angle grinder if I have a metal-cutting circular saw blade?
For straight cuts in studs, angle iron, or sheet stock, a circular saw with the right blade is often faster and more accurate than an angle grinder with a cutoff wheel. An angle grinder still wins for curved cuts, tight corners, or grinding welds, so most shops end up keeping both.
Is it safe to cut metal with a circular saw?
It's safe with the right blade and precautions: wear eye and hearing protection, expect some sparks even with a low-spark blade, secure the metal firmly so it can't shift mid-cut, and never force the saw through the material faster than the blade is cutting.

Keep reading

From the blog