As an Amazon Associate, DIY Handy Gear earns from qualifying purchases.

A sheet of plywood balanced on the garage floor or a couple of paint buckets is how most tear-out, wandering cuts, and pinched blades happen — the material flexes and sags right along the cut line because nothing is actually holding it level.

A real pair of sawhorses fixes that by supporting the sheet on both sides of the cut at a consistent, waist-high level, and the better ones fold flat enough to store in the same corner as your circular saw.

Good support only solves half the tear-out problem — pair these with the right blade and technique in our guide to cutting plywood without splintering.

How we picked: We focused on published weight capacity per horse and per pair, how flat and compact each one folds for storage, and whether built-in extras like clamps or a tool shelf are worth their added cost and bulk, based on manufacturer specs and owner feedback rather than our own load testing.

At a glance

#PickWhy it stands outPrice
WORX WX065 Clamping Sawhorses (Pair)Top Pickclamping boards in place while you cut - Built-in quick-clamps grip material up to 18 inches wide, horizontally or vertically, with no separate bar clamps to buyCheck Amazon
ToughBuilt C550 Sawhorse/Jobsite Table (Pair)Runner-upheavy-duty pick that doubles as a jobsite table - 1,100-lb capacity per horse (2,200 lbs for the pair) easily handles a full sheet of plywood without flexingCheck Amazon
Bora Portamate PM-3300T Steel Folding Sawhorse (Pair)Best Valuemounting a wider crossbar for sheet goods - Pre-drilled holes let you bolt a 2x4 or 2x6 directly to the top for a wider, more stable platform under a full sheetCheck Amazon
Stanley 060864R Portable Folding Sawhorse (Pair)Also greatbudget pick with a built-in tool shelf - Built-in lower shelf keeps a circular saw, clamps, or a tape measure within reach while you workCheck Amazon

The picks in detail

WORX WX065 Clamping Sawhorses (Pair)

Top Pick

9.6/10Editor’s score

Best for clamping boards in place while you cut

  • Built-in quick-clamps grip material up to 18 inches wide, horizontally or vertically, with no separate bar clamps to buy
  • Folds to about 2.5 inches thick for wall, shelf, or trunk storage
  • Light enough at 15.6 lbs for the pair to carry one-handed between the garage and driveway

Watch out Fixed-height legs mean no adjustment for an uneven floor or a taller work surface, and the clamps are rated for a modest 300 lbs of clamping force rather than heavy glue-up duty.

Check price on Amazon

ToughBuilt C550 Sawhorse/Jobsite Table (Pair)

Runner-up

9.3/10Editor’s score

Best heavy-duty pick that doubles as a jobsite table

  • 1,100-lb capacity per horse (2,200 lbs for the pair) easily handles a full sheet of plywood without flexing
  • Three height settings adapt the same pair to sawing, kneeling-height work, or a taller table
  • Included 2x4 support arms turn the pair into a flat jobsite table for a circular saw or miter saw station

Watch out All-steel construction makes it heavier to carry than the plastic options here, and it costs noticeably more than a basic folding pair.

Check price on Amazon

Bora Portamate PM-3300T Steel Folding Sawhorse (Pair)

Best Value

9.0/10Editor’s score

Best for mounting a wider crossbar for sheet goods

  • Pre-drilled holes let you bolt a 2x4 or 2x6 directly to the top for a wider, more stable platform under a full sheet
  • Folds down to a slim 3.5-inch-wide bundle for storage
  • Ships fully assembled, ready to unfold and use

Watch out The 33-inch height isn't adjustable, and the narrow top really does need that 2x4 crossbar add-on to comfortably support sheet goods on its own.

Check price on Amazon

Stanley 060864R Portable Folding Sawhorse (Pair)

Also great

8.7/10Editor’s score

Best budget pick with a built-in tool shelf

  • Built-in lower shelf keeps a circular saw, clamps, or a tape measure within reach while you work
  • V-grooves cut into the top cradle round stock like pipe or molding so it doesn't roll off
  • One of the cheapest sawhorse pairs available from a name brand

Watch out 500-lb-per-horse (1,000-lb pair) plastic-frame rating is fine for lumber and sheet goods, but it's not the pick for heavy vise work or holding up an engine.

Check price on Amazon

Frequently Asked Questions

Do I actually need two sawhorses, or will one do?
Get two. A single sawhorse only supports one end of a sheet or board, which leaves the cut side to sag and bind the blade. A pair supports both sides of the cut line so the sheet stays flat and level the whole way through.
Can sawhorses replace a workbench?
For cutting and rough assembly, yes — a pair of sawhorses with a sheet of plywood on top works as a temporary flat surface. For clamping, vise work, or finish-level tasks, a dedicated workbench or folding workbench is still the better tool.
What height should sawhorses be for comfortable cutting?
Most folding sawhorses land around 30-33 inches, which keeps a sheet near waist height for cutting without excessive bending. If you'll also use the pair as a makeshift table for other tasks, look for one with adjustable height settings instead of a fixed leg length.

Keep reading

From the blog